Products

Vento



VENTO 315/420/620 LINEAR SYSTEM
Vento Fiber Laser Cutting Machine 

      Vento model has high productivity and upper segment standards.

  • 4 kW, 6 kW, 8 kW, 10 kW, 12 kW and15 kW laser power options.
  • Our awarded design not only gives you eye-pleasure but also enables an advantage for you to step forward in the competition
    with its technological superiority.
  • Speed, sensibility, reliability and low operating cost with linear system, nozzle cleaning, auto nozzle changing, loading/unloading
    system and more features.
 

Camera Detection_Post copy.jpg
       
EDGE DETECTION CAMERA
Lets operators speed up sheet positionrecognition on the cutting table via a camera system on the
cutting bridge. Edge Detection Camera recognises the exact position of the sheet and the edges
of the sheet are measured exactly in a matter of seconds.
 

 
 
 
Nozzle Changer-Target_Post copy.jpg
       
AUTOMATIC NOZZLE CHANGER
With the developing technology and Industry 4.0, speed is becoming more prominent in the industry.
Nozzle changeperformed manually reduces work efficiency and leads to losses in work times. For this
reason, there is a need for a system which will automatically perform the nozzle change process especially
in the machines that communicate with each other, automation systems and the machines whose work list
already defined to be cut.

 
 

2036203147__Web.png
       
 LINEAR
 
 With the combination of servo drives and linear motors, you can reach high speeds in short distances.
 


 

CutLine-New copy.jpg
       
CUTLINE
 
Technology allows you to achieve better quality results on cutting surfaces compared to standard cuts.
 

 
 

Render-1_Post copy.jpg
       
AUTOMATION SYSTEMS
 
Enables you to automatically load and unload your machine.
 


MACHINE MODEL VENTO SERIES
VENTO 315 VENTO 420 VENTO 620
Sheet Dimensions 1530mm x 3050mm / 5x10 ft 2030mm x 4050mm / 6.6x13.2 ft 2030mm x 6050mm / 6.6x19.8 ft
Resonator (kW) 4,6,8,10,12,15 4,6,8,10,12,15 4,6,8,10,12,15
Axis X 3050mm 4050mm 6050mm
Y 1530mm 2030mm 2030mm
Z
80mm
80mm
80mm
Working Table Height 900mm 900mm 900mm
Maximum Loading Capacity
2000 kg 3500 kg 6000 kg
Positioning System
Linear Motor Linear Motor Linear Motor
Acceleration 30 m/s² 22 m/s2 22 m/s2
Axis Speed 
(X,Y Simultaneous Speed)
240 m/min 200 m/min 200 m/min
Positioning Accuracy (Pa)*
0.05 mm 0.05 mm 0.05 mm
Shuttle Table Change Time 27 sec 35 sec 45 sec
Controller 19" Multi Touch Screen 19" Multi Touch Screen 19" Multi Touch Screen
Assist Gas Oxygen (O2) : 15 Bar
Nitrogen (N2) : 25 Bar
Oxygen (O2) : 15 Bar
Nitrogen (N2) : 25 Bar
Oxygen (O2) : 15 Bar
Nitrogen (N2) : 25 Bar
Optional Equipments
-Auto Nozzle Changing
-Loading/Unloading System
-Air Cutting
-Cut Line Technology
-Piercing Sensor & Cut Detection**
 -Auto Nozzle Changing
-Loading/Unloading System
-Air Cutting
-Cut Line Technology
-Piercing Sensor & Cut Detection**
 -Auto Nozzle Changing
-Air Cutting
-Cut Line Technology
-Piercing Sensor & Cut Detection**
Machine Weight 16000 kg 20500 kg 27000 kg
 The right to make changes to dimensions, construction and equipment is reserved by NUKON.
*       The accuracy that can be achieved depends on variable factors such as workpiece design, heat treatment, dimensions and position in the work area. Values given are based on VDI / DGQ 3441.
**     This option is available for 6 kW and above power options.


CUTTING PARAMETERS
Resonator 4 kW
4 kW
CutLine
6 kW
6 kW
CutLine
8 kW
8 kW
CutLine
10kW
10kW
CutLine
12kW
12kW
CutLine
15kW
15kW
CutLine


Maximum
Cutting Capacity
Mild Steel
20mm 20mm 20mm 25mm 20mm 30mm 25mm 30mm 25mm 30mm 25mm 30mm
Stainless 12mm 15 mm 20mm 25mm 30mm 30mm 30mm 30mm 30mm 30mm 35mm 35mm
Aluminum 10mm 12 mm 20mm 25mm 30mm 30mm 30mm 30mm 30mm 30mm 40mm 40mm
Brass 6mm 8 mm 12mm 15mm 15mm 15mm 20mm 20mm 20mm 20mm 20mm 20mm
Copper 6mm 8mm 12mm 15mm 15mm 15mm 15mm 15mm 15mm 15mm 15mm 15mm
Power Consumption 380V/3PH ±%5 32 kVA 48 kVA 65 kVA 85 kVA 105 kVA 125 kVA

   RACE WITH SPEED FOR SUCCESS...

   Yeni tasarımımız, Vento serisi yüksek üretkenliğe ve standartlara sahip      üst segment lazer tezgâhıdır. Ödüllü yeni dizaynı ile sadece göz                    zevkinize hitap etmez, aynı zamanda rekabette bir adım           
   öne çıkmanızı sağlayacak teknolojik üstünlüklere de sahiptir.
 

Vento - Nukon
Nukon; lazer, plazma, su jeti, CNC alevli kesim makineleri, değişik kapasiteli atölye vinçleri, yük kaldırma magnetleri gibi makine ve ekipmanlar geliştirir
vento-nukon-keywords-lazer-sheet-machine-speed-power-guc