Specification
The Best Choice for Speed Hunters!
Lets operators speed up sheet positionrecognition on the cutting table via a camera system on the
cutting bridge. Edge Detection Camera recognises the exact position of the sheet and the edges of the sheet are measured exactly in a matter of seconds.
With the development of Industry 4.0 and advancing technology, speed has become a crucial priority in manufacturing. Manual nozzle change processes decrease operational efficiency and result in production time losses. As a result, the demand for systems that can automate nozzle changes in machines that communicate with each other, automation systems, and machines with pre-determined cutting lists is increasing. Automated nozzle change systems enhance production processes by speeding up operations, increasing efficiency, and reducing operation times, ultimately providing a competitive advantage in industrial manufacturing.
With the combination of servo drives and linear motors, you can reach high speeds in short distances.
Technology allows you to achieve better quality results on cutting surfaces compared to standard cuts.
By integrating automatic loading and unloading systems into your machine, you can accelerate production processes and significantly enhance labor productivity. This automation solution optimizes processing times, enabling faster and more efficient production while reducing human errors. With automatic loading and unloading systems, you can achieve operational efficiency and establish a seamless, high-productivity workflow.
info@nukon.com.tr
+90 224 241 69 69
Taşpınar Mah. Teknosab 6.Cad. No.19 Karacabey/Bursa, Turkey, 16140
Mon - Fri: 7.00am - 5.00pm
MACHINE MODEL | VENTO 315 | VENTO 420 | VENTO 620 | |
Sheet Dimensions | 1530x3050mm | 2030x4050mm | 2030x6050mm | |
Resonator Power (kW) | 4, 6, 8,12,15, 20 | 4, 6, 8,12,15, 20 | 4, 6, 8,12,15, 20 | |
Axis | X | 3050mm | 4050mm | 6050mm |
Y | 1530mm | 2030mm | 2030mm | |
Z | 80mm | 80mm | 80mm | |
Working Table Height | 900mm | 900mm | 900mm | |
Max. Loading Capacity | 2000 kg | 3500 kg | 6000 kg | |
Positioning System | Linear Motor | Linear Motor | Linear Motor | |
Acceleration | 30 m/s² | 22 m/s² | 22 m/s² | |
Axis Speed (X,Y Simultaneous Speed) | 240m/min | 200m/min | 200m/min | |
Positioning Accuracy (Pa)* | 0,05mm | 0,05mm | 0,05mm | |
Shuttle Table Change Time | 27 sec | 35 sec | 45 sec | |
Control Panel | 19” Multi Touch Screen | 19” Multi Touch Screen | 19” Multi Touch Screen | |
Assist Gas | O2:15 Bar N2:25 Bar | O2:15 Bar N2:25 Bar | O2:15 Bar N2:25 Bar | |
Optional Equipment | – Automatic nozzle change – Nozzle centre control – Sheet edge detection camera – Loading / unloading system – Air cut – Cut Line Technology – Penetration Sensor & Cut Detection** | – Automatic nozzle change – Nozzle centre control – Sheet edge detection camera – Loading / unloading system – Air cut – Cut Line Technology – Penetration Sensor & Cut Detection** | – Automatic nozzle change – Nozzle centre control – Sheet edge detection camera – Loading / unloading system – Air cut – Cut Line Technology – Penetration Sensor & Cut Detection** | |
Machine Weight | 16000 kg | 20500 kg | 27000 kg |
*The accuracy value that can be achieved depends on variable factors such as workpiece design, heat treatment, dimensions and position in the work area. Values given are according to VDI/DGQ 3441.
**Applicable only for power options of 6kW and above.
CUTTING PARAMETERS |
| Resonator | 4 kW | 6 kW | 8 kW | 12 kW | 15 kW | 20 kW | |
| Maximum Cutting Capacity | Mild Steel | 20mm | 25mm / 25mm* | 25mm / 30mm* | 25mm / 30mm* | 25mm / 30mm* | 35mm* |
| Stainless | 12mm/15mm* | 25mm / 25mm* | 30mm | 30mm | 35mm | 40mm | |
| Aluminum | 10mm/12mm* | 25mm / 25mm* | 30mm | 30mm | 40mm | 50mm | |
| Brass | 6mm /8mm* | 12mm / 15mm* | 15mm | 20mm | 20mm | 20mm | |
| Copper | 6mm /8mm* | 10mm / 12mm* | 12mm | 15mm | 15mm | 15mm | |
| Max. Power Consumption 380-400v/3HP ±10% | 42 kVA | 52 kVA | 72 kVA | 88 kVA | 104 kVA | 130 kVA | |
* Cut Line technologies can cut
***A laser-optical cutting system that has been meticulously maintained and calibrated. The materials should meet the quality standards required by Nukon, specifically for ‘laser cutting sheets.
